Plumbing Problems and Solutions - Repair Manuals

If you've owned a home for over 20 years, there's a very good chance, that you've had a water pipe break, a drainpipe clogged, a toilet that wouldn't flush right, or a water leak that damaged part of the home. If you don't know, what you're looking for and you have no idea what damage can be done, over time, this could mean trouble for the homeowner.

Plumbing problems like these have been around and will be around for many years. Knowing what to do about them, how to repair them and what materials will be needed, can be found in plumbing repair manuals for books. How would you like to have a professional plumber to advise you on your plumbing repairs. What if I told you that you could have a plumbing professional on hand at all times. Is this something that you might be interested in.

Well I can't guarantee that, so let's forget about what I just said and go to the next best thing. Plumbing repair manuals are full of tips and advice that when needed can sometimes be priceless. If water is leaking from the ceiling in your home and you have no idea, where the water is coming from or how to stop it from leaking, any information could be priceless and I mean priceless.

Plumbers, usually charge over $100 an hour for emergency service. I've seen plumbers come to peoples homes, turn the water off to the house, stop the water from leaking and now it is no longer an emergency. The plumber quickly pulls out an invoice for the plumbing repairs and it could be over $1000, if you decide that this is ridiculous and choose not to pay it, the plumber can hand you a bill for stopping the water leak. Some of these bills are what I would consider quite ridiculous, for just shutting the water off.

You're not paying the plumber for the amount of time it took him, you're paying him for his knowledge. If you knew where to shut the water off, you wouldn't have an emergency situation and could contact a plumber during normal hours. This could save you hundreds if not thousands of dollars.

With a simple home repair manual or a home plumbing book, you could prepare yourself for a situation like this and other plumbing problems. Most home repair manuals have general solutions and advice and can solve most of the problems around your home. If they can't solve all of the problems, they can probably save you from major catastrophes like a water leak.

Most of the time it's not the water leak that will cost the most money, it's the damage the water will do to your furniture, carpeting, wood flooring, walls or ceilings. A little information and preparation can save you a lot of money in the long run.

Home Plumbing Books

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

Basic Home Electrical Wiring - For the Do it Yourself Home Electrician

The Green Bay Packers were one of the most successful football teams and Vince Lombardi said something to them that I will never forget," This is a football." All the football players laughed and he said that we're going to start with the basics and that's what I'm going to do, with this article.

Let's start with our electrical wire, the two most common electrical wire sizes, that will be used in most homes, will be 14 and 12 gauge electrical wire. Let's clear something up, right off the bat, the smaller the number, the larger the wire. In other words a 12 gauge electrical wire is a little bit larger and will carry more electricity, for longer distances than a 14 gauge wire.

What about electrical outlet plugs? These plugs are usually the same, except for the fact that they come in different colors. When I said that most electrical plugs are the same, I'm talking about your standard wall outlet plug. There are different electrical plugs that will be used for air conditioners and some kitchen appliances like 220 Volt electric stoves and ovens.

What about your home's light switches? Your standard two way light switch will usually turn a one light on or a group of lights on, from one location. A three way light switch will usually turn one light on or a group of lights on from two different locations. A four way light switch, will usually turn one light or a group of lights on from three different locations.

It doesn't get any more basic than that. I hope this gives you a better understanding about your home's electrical system.

If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more home inspection pictures or home building ideas.

Thanks For Reading My Articles

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

10 Things a Homeowner Won't Tell a Contractor - Common Courtesy

I've been a contractor in the state of California for over 20 years and there are some things that a homeowner won't tell a contractor. These are a few things that a contractor might want to hear, but a reluctant homeowner, might have second thoughts telling their contractors how they really feel.

1. We are happy with all of the work that you did in a timely manner and we appreciate your services.

2. We are happy with the way you performed your construction tasks, efficiently and we appreciate your services.

3. The work was done by a true professional and we would recommend you to any one of our friends.

4. The payment plan that you created in the contract worked out perfectly and never made us feel uncomfortable. It never seemed like you had too much of our money or we were putting you in a bad spot financially.

5. Thanks for keeping the job clean, it meant a lot to us, because we have seen other construction jobs that look like a tornado ran through them.

6. Thanks for helping us with our design. Working with your contractor on a daily, weekly or monthly basis can be frustrating or joyful. Let the contractor know either way how you are really feeling.

7. You and your crew are extremely hard-working and we appreciate the simple fact that you didn't come to work late or leave early.

8. Thanks for the reasonable priced estimate on our project. You helped us say a lot of money and we appreciate that sincerely.

9. Thanks for doing the extra work at a reasonable price. You could have gouged us at certain times, but you chose to be fair and work things out, in a way that would benefit both of us.

10. This one is the most important and often overlooked by homeowners and it's simple and easy to do. Thanks for doing what you said you were going to do and actually doing it.

Just a simple thank you and paying them on time, for a service well done is enough for most contractors. However, a little common courtesy can go a long way, even in the construction industry.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Home Remodeling Contractor

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Click here if you're looking for additional Homeowner Contractor Advice. If you're interested in gathering more information on how to hire a good contractor, make sure that you visit our website.

Important Do-It-Yourself Home Remodeling Advice

Often I'm asked by homeowners, if they think that they can build something on their own. Often I end up explaining the process to them and it's pretty confusing. I would like to give some homeowners and construction handyman some do-it-yourself home remodeling advice, about projects that I think they should avoid and the reason why.

1. Working on Electrical Service Boxes

I really don't recommend, anyone who lacks experience working with electrical, to be working on it at all. When it comes to the electrical service box repairs, if you don't have any experience working in this specific area, I am suggesting this to all homeowners and do-it-yourselfers, stay away from electrical service power boxes. Electricity can be extremely hazardous to your health, so take my advice, this is coming from an expert on the subject.

2. Plumbing Water Supply Lines

I don't recommend, anyone who doesn't have any experience working with plumbing water supply lines, because if they break, or if your repair, doesn't hold properly, you could destroy a large portion of your home. Picture this, you just got through putting a new faucet in, everything looks great, but it's time for you to go to your baseball game. You come home about four hours later and the entire house is flooded with water.

This kind of stuff does happen and you need to take the advice of an expert here. It has even happened to me and I understand the process, pretty good. If you plan on fixing any plumbing water supply lines, make sure that you can spend the time, keeping an eye on your new home repair. If you're going to have any problems with them, they will usually happen within the first few hours of use.

I hope this helps, sometimes it's better to pay a professional, but I can understand, every intelligent person, is interested in saving a few dollars and learning new skills.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Pictures and Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Vista Home Repair Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Home Purchasing Checklists Provide Protection

Home purchasing checklists provide protection for consumers with useful information for future home repairs or current home repairs that will need to be done before the home is sold. Home inspectors often use checklists like these, while they're inspecting the home.

If more home shoppers used home inspection checklist while shopping for houses, we would probably have more satisfied homebuyers than dissatisfied ones. Recently just purchasing a home, we had our real estate professional, the previous homeowner's real estate professional and a mortgage lender, involved in the purchase of the property.

There was a home inspection report from the current homeowners, available for us to look at. It provided us with the damaged parts of the home that were repaired or replaced. Some of these repairs were from termite damage and it was stated so on the report. This was helpful information for us as we walked around the home inspecting it for damage.

The work that was repaired to look satisfactory and the rest of the home had minor damage. Listening to one of the real estate sales people that were involved in the transaction, you would've thought we would get in the deal of a lifetime and they had nothing but good news to say about the product they were representing. I easily understood that, this person could have influenced some one into believing that the home was in great shape, if they didn't have a home inspection checklist with them.

The home had been re-carpeted, painted and was in generally good shape. The problems with the home, were the old windows that were hard to open, the heating unit leaked gas, the tile flooring that ran through the kitchen and a large room addition looked great, except for one thing, they installed the tile over linoleum.

This eventually will have to be replaced as the tile starts to separate from the linoleum. While I'm writing this article, there's about 40 square feet of tile that needs to be replaced, because it's popping up and cracking.

A home purchasing checklist does not guarantee that you will find everything but can't eliminate some of the things that homeowners have the biggest problems with. If you could just eliminate one of these problems, the small price of purchasing, one of these checklists would be worth it.

Home purchasing checklists provide protection for the shopper and I would recommend, never shopping for a home without one.

If your looking for some more home inspection or home building ideas.

By Greg Vandenberge

Important Do-It-Yourself Home Remodeling Advice

Often I'm asked by homeowners, if they think that they can build something on their own. Often I end up explaining the process to them and it's pretty confusing. I would like to give some homeowners and construction handyman some do-it-yourself home remodeling advice, about projects that I think they should avoid and the reason why.

1. Working on Electrical Service Boxes

I really don't recommend, anyone who lacks experience working with electrical, to be working on it at all. When it comes to the electrical service box repairs, if you don't have any experience working in this specific area, I am suggesting this to all homeowners and do-it-yourselfers, stay away from electrical service power boxes. Electricity can be extremely hazardous to your health, so take my advice, this is coming from an expert on the subject.

2. Plumbing Water Supply Lines

I don't recommend, anyone who doesn't have any experience working with plumbing water supply lines, because if they break, or if your repair, doesn't hold properly, you could destroy a large portion of your home. Picture this, you just got through putting a new faucet in, everything looks great, but it's time for you to go to your baseball game. You come home about four hours later and the entire house is flooded with water.

This kind of stuff does happen and you need to take the advice of an expert here. It has even happened to me and I understand the process, pretty good. If you plan on fixing any plumbing water supply lines, make sure that you can spend the time, keeping an eye on your new home repair. If you're going to have any problems with them, they will usually happen within the first few hours of use.

I hope this helps, sometimes it's better to pay a professional, but I can understand, every intelligent person, is interested in saving a few dollars and learning new skills.

If you're really interested in basement remodeling and repairs, you should click on this link Home Repair Pictures and Advice. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link Vista Home Repair Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

Five Things That a Termite Inspection Company Might Not Ever Say

I don't think that I've ever heard of a termite inspector, ever go to a home and not find any termites. Even if the home doesn't have any damage that is visible from the termites, it seems like it's always a good idea, to tent the home, just in case, for protection. Anyway, here's five things that you might not ever hear a termite inspector ever say.

1. Your house is free of termites. This means that there isn't, one termite on your property and the termite inspector isn't going to make any money. Let's face it, termite damage, whether it's visible or invisible, keeps these guys working.

2. Your house isn't going to fall down, if I don't do anything to stop the termites. I have seen homes, where termites have been working on them for quite some time and they still seem to stand up and function properly.

3. Termites don't eat much and I wouldn't worry about the damage. Most termite inspectors will tell you how much a termite in Hawaii or Africa will eat in a day, but doesn't seem to have an honest idea, how much damage they are doing to your home, if they can't actually see it.

4. Every one that works for our company, has at least 30 years experience, repairing any termite damage. Don't even get me started with this one.

5. We will replace all of the termite damage wood, back to its original condition. What they might say, is that they will replace the wood that is damaged by termites, that you can actually see.

There are plenty of great termite companies out there and this article was meant just to have fun with most of them. Termite damage can be a serious problem with some homes and I would suggest that you contact at least three termite inspectors, before proceeding ahead with any home repairs or use of chemicals.

Try not to forget, the only way that a termite inspection company will make any money, looking at your house, will be to find something wrong with it.

If you're really interested in basement remodeling and repairs, you should click on this link Easy Home Repair Tips . Get some great home repair advice that can make a big difference on any of your home remodeling projects.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link San Diego Remodeling Contractors

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks For Reading My Articles

How to Protect Foundation Plumbing Pipes?

If you install any underground plumbing pipes, in your concrete building foundation, you will need to protect them, from the concrete. You can use a variety of products and the most common of them will be a Styrofoam wrapping that can be purchased at most plumbing supply stores.

Let's start with the waste pipes, that are made out of plastic. The concrete could actually start to put pressure on the plastic pipes as the concrete starts to expand and this pressure could actually damage your new waste pipes.

You don't need to wrap all of the plastic waste pipes, only the parts of the waste pipes that will be exposed or in direct contact any concrete, but you do need to protect every copper water supply line that will be buried under the ground or exposed to the concrete, with a plastic sleeve. These products can be purchased again at most building supply or plumbing supply stores.

If these pipes aren't protected properly, you could find yourself within a short time, repairing the pipes that are either inside of your concrete foundation or buried underneath your concrete foundation. Either way, this isn't going to be a good thing.

You definitely need to wrap a plastic sleeve around the water supply pipes that are going to be buried or in direct contact with the concrete. This is a must and most building departments will require your plumbing pipes to be wrapped, before it they will sign off on your rough foundation plumbing inspection.

However, for the waste pipes, you can actually use cardboard to protect them. If you're short on funds, why not grab some cardboard boxes, dismantle them and start using cardboard to wrap the pipes, with a little duct tape.

There are plenty of ways to save money in the construction business, buy a few books, read a couple of articles, with a lot of pictures in this can provide you with lots of construction information, from experience building contractors.

Check out some of the best selling Home Building Plumbing Books all on one website

If you're really interested in basement remodeling and repairs, you should click on this link Home Repairs. Get some great home repair advice that can make a big difference on any of your home remodeling projects.

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

Thanks for reading our articles

Plywood Roof Sheeting - Roof Framing Trade Secrets

Most framing contractor's look at the building plans and order all of the material, according to those that are specified on the plans. This works out fine, and can often save you money, but rarely produces the best home that you could possibly frame.

As a professional framing contractor, I would like to share one of my house framing tips with you. Most plans require half-inch plywood or oriented strand board as their roof sheeting. This product is fine and if you're building a lot of homes, you're not going to have the choice. Ordering larger sized plywood could cost you thousands of dollars, especially if you're building a lot of homes.

However, if your framing or building a home for someone or even yourself, you might want to take my advice and think twice about it, before ordering the roof sheeting. Half-inch plywood, works okay for 16 inch on center roof rafters or engineered truss roofing systems. It doesn't work well on 24 inch on center roof rafters spacing.

It is usually flimsy and weak at the center point, directly in between the 24 inch roof rafter bays. If you're going to use the half-inch plywood, I would recommend using plywood clips that are relatively inexpensive and can be placed in the direct center of each roof rafter bay on each sheet of plywood. These can be purchased at most home improvement centers or lumber yards.

The other alternative, and this is what I recommend, would be to use 5/8 inch plywood. This plywood works great for 24 inch on center roof rafters and you will have a nice sturdy roof to walk on, while roofing your home.

I have actually seen people step through the flimsy plywood, while lifting heavy roof tiles and bundles of composition roof shingles. Experienced roofers try to walk directly on top of the roof rafters, when loading their roof shingles or even carrying them on the roof.

If you're a home builder and your concern is about making a profit, you will need to use the half-inch plywood. If you want to build a superior roof, use the 5/8 of an inch plywood.

If You Live in Northern San Diego County or South Orange County, and You're Looking for a Great Contractor, Click on This Link House Framing Contractors.

You are free to copy this article to your site as long as you include the following resource information with an active link to my site:

Greg Vandenberge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a excellent home inspection checklist to take some of the frustration out of home shopping.

Thanks For Reading My Articles

What to Do About Basement Waterproofing - House Remodeling Ideas

Owning a home with a basement can give us additional living space that is not typically available in a home with a crawl space. Many people put recreational rooms in the basement as well as using them for storage and often as a personal workshop. It may be difficult, however, whenever water in the basement becomes a problem. There are really two different ways in which water can invade this area of our home, both of which will take some form of waterproofing to correct. They can either come in slowly, almost undetected by us or it can quickly invade our basement and cause it to be flooded.

Since the basement is below ground level, moisture is often a problem, even if it is not visible. It may show up as mold or mildew that begins to appear on the walls and although you cannot actually see the moisture that is present, there are plenty of telltale signs that will help to identify the fact that you have a problem.

Doing a little bit of basement waterproofing for this usually means putting a specific type of paint on the walls or perhaps even spraying them down with chemicals so that they are impervious to mold growth. It may also help if you run a basement dehumidifier on a regular basis, even after you have completed the basement waterproofing project.

The other way that water can invade our basement is all at one time which can cause it to be flooded. I have personally had a difficulty with this for many years and it can be destructive, especially if you use the basement for living space or storage. If the water is coming in at one specific location, sealing that location in some way or another may help to cure the problem a little bit.

There may be times, however, whenever more drastic measures need to be taken. If you're basement floods on a regular basis, you may need to dig down to the bottom of your foundation on the outside of the walls and install a French drain. This will divert any water away from the house so that it does not end up in your basement.

Having a problem with water in your basement is simply keeping you from enjoying part of your house. Although waterproofing your basement is going to take a little bit of work, it will all be well worth the effort whenever you can take this part of your home back again.

You can find out more about Basement Waterproofing as well as much more information and tips on everything to do with basement waterproofing at http://www.BasementWaterproofingTips.com

Need Help Remodeling In Carlsbad

Build Your Own Sauna - What You Need To Know First

It can be easier than you think to build your own sauna. With some basic carpentry skills and a little specialized understanding you can be relaxing in your own home sauna in no time at all.

There are a few important decisions to be made to be sure you end up with the sauna that best fits your situation. One consideration is how much work you want to put into the building of your sauna. There are prebuild units that are delivered to your door and literally take only a few minutes to set up. You can also get precut kits that take longer to construct but give you a more custom sauna when finished. The ultimate is to build your own sauna from scratch. Even this method is not as difficult as you might expect. The costs tend to go down considerably as you add more and more of your own elbow grease.

Another concern is the location. Should your sauna be inside or out, attached or freestanding? This may depend on whether you are in a rural or city environment. Locating near a water source is also important. If you are outside this can be a lake or pond to jump into. For indoor saunas a nearby shower can be used to rinse off. In either case before you start building think about getting water to your sauna. Along with a convenient way to rinse off it is nice to have an area to change into and out of sauna apparel. Benches for sitting on while removing clothes and hooks for hanging them are a great feature.

Deciding how you will heat your sauna is a major decision. Conventional saunas are heated with either wood, electric or gas heaters. Any of these can be used dry or wet depending on whether you sprinkle water on the heated rocks or not. Some people like it dry and some prefer wet, it comes down to personal tastes. Before deciding which kind of stove you want think about getting fuel to your heater. Wood may be difficult to acquire in the city but electric or gas hookups may be impractical in more remote areas. Costs can vary greatly depending on the brand and type of stove you get. A relatively new (compared to the 2000+ year history of saunas) type of sauna is the infrared sauna. These use infrared emitting lights to penetrate and heat your skin. It is a little like your microwave oven in that the food (you) is heated but the surrounding air is not. Infrared saunas are always dry. Because of the complexity of installing and correctly positioning the infrared wave emitters I suggest you buy a prebuilt model if you go with infrared.

There are a few special concerns that distinguish building a sauna from other conventional frame construction. Moisture is a concern. There should be a vapor barrier to keep the heat and steam from escaping. Any electrical connections need to be protected from excessive moisture. Ventilation is necessary to keep the oxygen level up and if done right it will also help to evenly distribute the heat.

All in all building a sauna is not an overwhelming task. If you can do some basic framing and simple finished woodworking you are well on your way to building your own sauna that can be enjoyed for years to come.

Mike Hirn has been a sauna enthusiast for many years and his website provides a wealth of information about building, using and enjoying home saunas.

http://www.the-home-sauna-center.com

Nailing Or Screwing Drywall

Remodeling Your Home For Resale

It is true that remodeled kitchens provide a good return when selling your home, but such a project is very involved, costly, and often a headache. Instead of a complete overhaul, give your kitchen a fresh appearance by installing new appliances and replacing outdated cabinet hardware with trendy pieces.

Another simple improvement to your kitchen includes changing faucets and light fixtures. Freshen up bathrooms in the same manner as the kitchen. Change hardware pieces such as faucets, towel bars, soap dishes, as well as light fixtures. Also think about updating your mirror and other accessories in the room such as shower curtain, wall hangings, and towels.

Fixing up the yard will add significant curb appeal and is one of the most worthwhile improvements you can do for your home. Curb appeal refers to the view of your home from the street. Because the outside of your house is the first thing the buyer sees, the yard and entry leave a strong impression and help the buyer decide whether they even want to see the rest of the house.

So go out to your curb and look at your house; does it look nice? Can you even see it? If you have large trees or shrubs that cover the majority of the house, cut them back or get rid of them to increase your curb appeal. Make sure the yard is neat and trimmed and for a small investment you can put together a beautiful flower bed or adorn the entry with beautiful potted arrangements.

Also, consider improving the entry way by installing new trendy porch lights and a new mailbox. If necessary, give your home a fresh coat of paint. All of these improvements are relatively inexpensive but make a big difference when it comes to selling your home.

When it comes to carpet, first check to see if there are hardwood floors underneath by lifting up a corner in a closet. If there are hardwood floors, just have the carpets well cleaned and advertise that there are original hardwood floors.

More buyers are attracted to wood floors these days. If there is not wood below and the carpets are old, have the carpets replaced. New carpets give your home both the smell and look of newness.

Seriously consider painting the entire interior of your home, especially if it hasn't been done in a while. When you are repainting, choose light neutral colors. Although dark or bright colors may be trendy and look nice, they limit the buyers' ability to picture the home as their own. A light and neutral color will clean up the walls without turning off any customer.

Although you may love your neon beer sign in your living room, some buyers may not and can be turned off by such personal items. Try to make your house more generic and hide your quirky belongings; try to make it look like a model home. It helps the buyer picture their own belongings on the wall.

Keep your house clean. This costs nothing but makes all the difference. No one wants to pay a good price for a cluttered and dirty house. If you are a pack rat, now is the time to change the habit and throw it all away or invest in a storage unit to place all your junk. Avoid a cluttered look and make sure everything has a place and is put away.

These small improvements will make a big difference and will give you the best opportunity to sell your home quickly and for the best price.

A good looking home can fetch you a good price. You could give your kitchen a fresh appearance by replacing outdated cabinet hardware without spending too much on complete kitchen remodeling Sarasota homes can look renovated with simple ideas too. Visit http://www.eurotechcabinetry.com.

Toilet Paper Under The Bathroom

Installing Laminate Flooring - Dos and Don'ts!

Every manufacturer of laminate flooring provides very specific instructions on the proper method of installing their product.

There are however, some common dos and donts that apply to the installation of any laminate floor. Surprisingly many people ignore these instructions, believing that they know better than the manufacturers.

• Laminate flooring must acclimatize to your home. This is done by placing the boxes in the room where you are going to install the laminate for a minimum period of 48 to 72 hours. Failure to do this will cause floors to buckle. This is the number one mistake made by most people including contractors.
• There must be a gap between walls and any other obstacle, (columns, stair risers, heat vents, etc.) of between 5/16" and 1/2" depending on the manufacturer. This allows for the expansion of the floor. If a gap is not left, the floor will buckle.
• If the laminate flooring is going to be installed on a concrete slab floor where there is earth below the concrete, a vapor barrier must be placed between the concrete and the laminate. The seams should be taped with a moisture resistant tape. Laminate flooring should not be installed on any floor that has a drain.
• Some manufacturers will allow the installation of laminate flooring on carpet. The carpet should be a hard twist (Berber), or a very low pile (commercial carpet). If the underlayment is spongy, the flooring will separate when walked on.
• The smallest piece of flooring should never be less than 8 inches long and the width should never be less than 2 inches. Measure your room before you start the installation as it may be necessary to cut the first board in length and the first row of boards in width to avoid having small pieces.
• Joints should be staggered a minimum of 16 inches apart and a minimum of 3 rows for repeating of the joint.
• If installing base board or quarter round on top of the laminate, do not nail through the laminate. A laminate floor must be allowed to expand and contract.
• Repair any and all squeaks and soft spots in the sub-floor before installing the laminate. Laminate flooring will not correct squeak or soft spot problems.
• Do not continue the installation of laminate flooring through a doorway that is less than 48 inches in width, use a transition molding.
• Do not hammer on the groove end on the board ever!
• Always start the installation of the laminate flooring with the groove side and end towards the walls.
• Always use a tapping block to help tighten joints, but do not over hammer or you will damage the surface of the laminate at the joints.
• Floors must be level, no more than 3/16 slope over a ten foot span.
• Floors must be flat. Any dips in the floor should be filled in with self-leveling compound and left to dry at least 72 hours.

Read and follow the manufacturers instructions and you will end up with a quality floor that will last for years.

For additional information on flooring products for your home or other renovation projects, visit Renovation Headquarters.

Painting Metal Siding

Discount Wood Blinds - What You Should Know

All too often, people make the mistake of thinking that wood blinds are just too expensive to fit their budgets. The truth in most cases is just the opposite. Try searching for discount wood blinds and you will find wood blinds that are not only attractive, but will fit your budget as well. Here is a closer look at ways of finding discount wood blinds.

Before you begin your search for any type of wood blinds you need to do a little prep work. You will need to how many windows you wish to cover as well as get all your measurements written out. This will come in handy later.

Next, get a good idea about the different styles and brands of wood window blinds by doing a little window shopping at some of your local stores. Why is this important? Well, many times what you see online may not look the same in person.

Finally, have a budget in your mind so you know what you can spend.

Now, it's time to begin your search for discount wood window blinds.

As you were window shopping so to speak I am sure you also took the opportunity to check out the prices on various blinds. Perhaps the store even had a clearance sale going on. This is a great way to find big discounts on wood blinds. You will definitely want to keep an eye out for any sales.

You may also find a one of a kind closeout sale of sorts. This can be a great way to get a good deal, but be careful that the blinds aren't damaged or defective when you are in the store. Often times these bargains are offered at a no return policy.

Shopping at websites online is another great way to find discount wood blinds as well. Online stores such as Levolor, Hunter Douglas, and many others all have sales at various times of the year. Even beyond that, doing a search for discounted blinds will bring up many other options.

The important thing to keep in mind with buying wood blinds online is to be sure of their return policy. You never know if you might want to return them and you don't want to find out later that you are out of luck. Any reputable dealer will have a good return policy.

These are just a few ideas on how to find discount wood blinds. Like most anything you want, the key is to take your time and search things out. By doing so you will find exactly what you want at a great price!

By the way, you can learn more about Discount Wood Blinds as well as more information on everything to do with wood blinds by visiting http://www.WoodBlindsA-z.com

Painting Metal Siding

Sources of Heat Loss in the House

There are three main sources of heat loss in the house that when fixed may save you up to $500 per year. One source of heat loss that you may not have considered is the fireplace. Some homes have an open fireplace that is certainly just like leaving a window open. Warm air escapes through the chimney, which acts as a funnel, drawing air up and out. Even if you have a firebox installed into your fireplace and the gaps all around sealed, there is still the damper.

The damper creates an airflow without which the fire could not burn, but when there is no fire going, leaving the damper open is like leaving a window open. In fact, you could lose up to 30% of your air conditioning heat through the damper.

Not all houses have an attic, but many do, so if you have access to your attic by means of a folding stair, the ceiling and insulation will have been removed to install it. Frequently it is just covered up by a thin piece of plywood that may even have gaps around the edges. To find out, switch on the attic light at nighttime and view it from below. If you can see specks of light, there are gaps that need closing. In fact, the whole area should be covered with an attic stair cover.

The third place for heat loss is if your clothes dryer exhaust is ducted to an outside opening. Even when the door is shut, warm air can still escape through the clothes dryer. Add a dryer vent seal to solve the problem and keep out bugs as well.

Find out more about the Advantage Air http://www.advantageair.com.au range of reverse cycle ducted air conditioning including the Gen 3.

Installing Windows At A Eye Leve

Technologies of Home Improvement - Siding and Chemical Treatment

The modern homeowner has a wealth of opportunities available to them to improve and refine their homes. In the past, it was often believed that the homeowner must take responsibility for every aspect of their home through a hands-on, attentive, and time consuming process of detail adjustment, surveillance, adaptation, and analysis.

While it is true that the modern homeowner has not been completely absolved of the necessities of care and commitment, recent technological advancements, specifically in the fields of lawn care and home siding, have been able to provide unique opportunities and advantages for homeowners from the 20th century. However, with these advantages come unique problems as well. One should examine the technologies of James Hardie siding and environmentally friendly pesticides to consider their strengths and weaknesses.

James Hardie siding is a relatively new invention that claims to be fire resistant and affordable. We can defer the need to examine the affordability of this product momentarily so that we can consider the advantages of fire-proof home siding. This may be an instance of a new technological advancement that solved a problem that few, if any homeowners even knew that they had.

It is in fact the case that traditional home siding is flammable and is often the cause of serious fire damage during a home crisis. While infrequent, when a house fire spreads to the outside siding of a residence, it can exacerbate the damage and spread around the house at a moment's notice. On this point, James Hardie siding is a clear advantage as it is inflammable and will not put the homeowner at risk of exterior home damage.

The second technology to consider is environmentally friendly pesticide. Many homeowners are been keenly aware of the environmental damage that is caused by pesticides and chemical treatments. In recent years, however, new, environmentally friendly products have been released to aid in the control of your lawn's pests without damaging the environment at large.

Likewise, this technology is a clear advancement over prior treatments, but it should not be considered the solution to all chemical problems- even environmentally friendly can be harmful if used too frequently or before rainstorms.

Both technologies have been demonstrated to be improvements over past products. The remaining issue is the affordability of both products. It cannot be said with any degree of certainty that an individual should purchase these new technologies. In a time of economic crisis it is too much to presume to know the individual financial situations of homeowners. It is up to the homeowner to decide to budget and analyze their own financial circumstances to see if they can afford the new technologies of home ownership.

Mr. Oliver is a marketing agent of Preferred Siding. The siding contractor provides James Hardie and Hardiplank Siding throughout the Northern Virginia area. For more information on their cosmetic surgery Richmond Virginia please visit their website.

Toilet Paper Under The Bathroom

How to Build Your Commercial Greenhouse

The success and productivity of running a greenhouse depend mainly on the kind of growing materials used. Since there are a number of designs to choose from, it is important that you familiarize yourself with the pros and cons of these designs. You should also choose plants suitable for the design of your greenhouse.

Kinds of Greenhouses

A detached or free-standing greenhouse is generally an independent structure a few meters away from your house. However, it can be joined by building walkways. The advantage is that you can build it as large or as small as you want.

The most common detached greenhouse for commercial use is the Quonset. This greenhouse is built using arched rafters that usually have solid end walls for additional support. Quonset greenhouses are suitable for the production of most crops but due to their limited head room and storage area, plant growth may be restricted, hence diminishing productivity and efficiency.

Ridge greenhouses are usually attached through a shared gutter. The absence of an inside wall below the gutter is an advantage as it increases efficiency. Gabled greenhouses are perfect for heavy coverings such as glass or fiberglass. Curved arch greenhouses are usually covered with much lighter substances such as polyethylene or polycarbonates. Connected ridge greenhouses are often referred to as range.

Planning

To ensure that your commercial greenhouse will be profitable, some of the factors to consider are proper area selection in relation to markets, utilities, labor, as well as future plans for expansion. You should plan the following:

Type of crops you will be growing (herbs, flowers, perennials, orchids, vegetables, potted plants, and others)

Growing period of the crops (are they seasonal or year-round?)
Plants that will be grown (to allocate the space and prepare the soil or pots)
Growing medium (soil, no soil, mix, nutrient solution, compost, fertilizer)
Growing methods (flooring, beds and flood, growing bags)
Annual productivity
Marketing strategy (wholesale, retail, or both)
Capital or investment

Here are other things to consider when building a commercial greenhouse:

1. Space. The area needed mainly depends on the type of business you are planning to get into, whether retail, wholesale, or both. Two acres is the suggested minimum space for a commercial greenhouse. Make way for parking space for your customers and employees, delivery, storage area, and future expansion plans.

2. Zoning. It is advisable to consult your zoning officer about your plans to set up a commercial greenhouse. There are certain cities that require a permit for building a greenhouse to ensure safety and the welfare of the community.

3. Highway access. For retail businesses, a location near or along a high-traffic road or near a residential site can greatly increase business. Wholesale business needs access to some interstate highway to deal with heavy road traffic.

4. Environment. Select a clean location, one that is away from industrial pollution like factories

5. Climate. Avoid areas with extreme temperatures. Some plants may be sensitive to extreme sunlight or extreme cold weather.

6. Slope. Aim for a ground slope to provide water drainage that is vital for your greenhouse. Greenhouses must be situated on gravel base, 6 to 12 inches above grade.

7. Water. Plants need sufficient humidity for optimal development and the highest production of flowers and crops. Test water that comes from natural resources. They are known to have impurities that may be harmful for your crops.

8. Electricity. Ensure that your commercial greenhouse will have enough supply of electricity. As early as in the designing stage of the greenhouse, call on your areas electricity provider regarding power availability. Also call on your electrician to help design the electrical layout.

9. Expansion. All throughout the development and planning stage, factors must be considered for later expansion plans.

Note that before setting up your greenhouse business, careful research should be made. You will be learning new things as you go along with this business venture.

Do you need articles on greenhouse and green living? The Content Annex can craft strong copies and relevant articles for your website. We also write press releases, sales, copies, blogs, SEO articles, e-books, newsletters, autoresponder emails, and content for other marketing materials. For more information, visit: http://www.thecontentannex.com

Toilet Paper Under The Bathroom

Interior Paint Finishes - Poway Home Remodeling

When choosing a paint color for a room, the selection does not just stop at the precise color; the finish also plays an integral role in the project. What many may not realize is that there's 5-6 different paint finishes to choose from. Each finish has its own pros and cons which if not analyzed, could deter from the final outcome of the home painting project.

Here's a breakdown of each individual finish:

Matte Finish

Whether called flat finish or wall paint, this type of interior paint has a matte surface. This paint finish is usually used on interior walls. It's especially good if you have to camouflage small wall bumps, cracks, or other imperfections, as this finish does not reflect light. While some flat paints are advertised as washable today, you may need to touch up scratches or marks by covering with a bit more paint, so be sure you keep some on hand after you've finished painting.

Eggshell Finish

If you can picture the very low sheen of the shell of an egg, you have an idea of how an eggshell paint finish will appear. With only a slight hint of shine or gloss, it's good for walls and holds up better with cleaning than a flat finish paint.

Satin Finish

Satin finish paint has a smooth, velvety look with a bit more gloss. It is most often used for windows, doors, trim, or ceilings, but can also be used as wall paint. This is particularly suitable for kids' room walls, kitchens, or bathrooms, or in areas with a lot of traffic. Paint with a satin finish is formulated to hold up to cleaning and light scrubbing.

Flat Enamel

Flat enamel is paint with a durable flat, matte finish. It's a good choice for powder rooms and halls, as it holds up to occasional light cleaning.

Glossy

Glossy finishes tend to give off a shiny finish imitating the appearance of enamel or plastic. This finish is not recommended for use on interior walls. A glossy finish is often seen on furniture and has recently become somewhat of a trend as a finish on cabinets and trim. A glossy finish provides a dramatic finish but has its disadvantages. Something to keep in mind when choosing a glossy finish is the paint finish will not hide imperfections. If anything the finish will magnify surface imperfections, so thoroughly assess your project area for dings and deep imperfections. Another helpful tip is sanding before starting to paint is necessary.

Semi-Gloss

A semi-gloss paint finish is a wonderful choice for doors, cabinets, and trim in places like the kitchen and bathrooms. Semi-gloss can be easily cleaned and offers a delicate shine without too much gleam. Because of the slight sheen, imperfections are disguised better then say a glossy finish. To have to best outcome, it is recommended that the surface be thoroughly prepared before paint application. This process includes sanding out groves and puttying holes and indentations.

Hopefully the breakdown of each paint finish has helped you in selecting what kind of finish you want to give your interior home painting project. Never hesitate to ask your painting pro further questions and opinions about finishes in your home.

Emil Suiugan

Prime Painters, LLC

PrimePaintersLLC@yahoo.com

Emil Suiugan is the owner of Prime Painters, LLC, a metro Atlanta based painting company. He has 10+ years of experience as a paint contractor and has established his company as one of the most reputable and top paint contracting companies in Metro Atlanta and the North Georgia area. Feel free to contact for more information.

Window Header Framing Problems

Four Tips to Help You Finance Your Bathroom Remodel

Financing any large remodeling project can be a pain, but when it comes to your bathroom, it can be an outright nightmare. But that doesn't have to be the case for you. When you learn about these four ways to help finance your bathroom remodeling project, you'll not only get to keep the bathroom vanity cabinets and vessel sinks that you've had your eye on, but you will also be able to add other stylish features that you never dreamed you could afford. While not all of these options will work for everyone, there's a perfect fit for you.

#1 Save your pennies

While many people might consider this to be the hardest way to finance your bathroom vanity cabinets, it's also a good way to prioritize the things that you want to add to your bathroom. By taking the time to put away money each month for six months, you will be able to buy your bathroom remodeling pieces outright instead of paying them off for years to come. Try putting as much as you can away into a savings or money market account that will give you a high interest rate. This will accumulate as you're saving, giving you even more money at the end of your planned savings time. Start by looking at how much money you have at the current time, deciding how much you will need, and then start saving!

#2 Finance your project

For those with good credit, you may be able to say 'yes' to vessel bathroom sinks immediately by opening up a store line of credit at your local bathroom supply store. Look for deals that include no interest for a specific period of time and then be sure to pay off the full amount within that time period. This will help you get everything you need at the same time, but allow you some grace time to pay it back off. The trick with getting credit is that you only want to get as much as you need so that you're not paying off this debt for the rest of your natural life.

#3 Make a trade

If you know someone in the bathroom remodeling business, you might be able to trade skills for a bathroom remodel. For example, if you're a carpenter, you might be able to help a bathroom contractor out with another project, free of charge in exchange for work on your own project. You might also have friends that can help you out and then you can pay them pack later or make other arrangements so that you can install your vessel bathroom sinks or vanity cabinets. You might also find the supplies you need at a swap meet or flea market.

#4 Shop around

You'd be surprised how many vessel sinks and bathroom vanity cabinets you can find for a steal on the internet. By shopping around, you may be able to find the right fixtures and accessories for your bathroom and then hire on a friend to help you install them - saving you labor costs. You might also try to install your own fixtures and other bathroom projects to save yourself even more money and give you a sense of accomplishment.

Financing your bathroom remodeling project isn't about taking out a large loan and hoping that you don't need more. Budgeting and financing should be something that takes creativity and some discipline. You need to make money available or use your money more wisely to finance your project - plain and simple. Where you cut those corners is up to you.

For all the things you need to make your bathroom shine, go to http://www.discountbathroomvanities.com

Dave Robert is a VP at Discount Bathroom Vanities Publishing, and an avid fixer-upper who's been restoring old houses for more than twenty years. Readers can tap into Dave's knowledge about home remodeling, and kitchen and bathroom design, at: http://www.DiscountBathroomVanities.com

Painting A French Door

Ways to Use Your Basement

Many of us have unfinished basement spaces that don't seem like a good fit for many activities. They are large and expansive, and it can be overwhelming to finally tackle the space to make it usable. When tackling home improvement in your own home, it's a good idea to first contact a reputable contractor that can help you plan and then renovate your space. But your basement is a great area for many different activities.

If you have teenagers or children that are constantly tell you they're bored, how about a game room? You can purchase inexpensive versions of parlor games such as billiards, air hockey and ping pong, and with the large space of a basement, they'll all fit. It's a great way to keep tabs on your teen when his or her favorite hangout is at your house!

If you're a movie lover, how about an in-home theater? With the darkness of a basement, it's an ideal spot to show your favorite films to all of our friends. Setting up a sound system is fairly easy, and if you have a clear wall you can even project larger images onto a screen, making it just like the movies!

Are you a photography buff? How about evolving your craft and having your own dark room? Home improvement doesn't have to be hard, and with a good contractor, you'll be able to transform the empty space in your basement into a space that you'll use and love for years to come.

Creative Basement Solutions (http://creativebasementsolutions.com/) is a contractor doing home improvement in Florence Kentucky. Billings Farnsworth is a freelance writer

Thriving in Today's Building Industry

For nearly 20 years Sony ruled the portable music industry with its popular brand Walkman. Through cassettes to CDs Sony Walkman was an industry leader in portable music players, yet in 2001 this seemingly unstoppable force fell from the top down to just another name in crowd of generic alternatives. In October of 2001 Apple launched the iPod and completely overtook the market. Apple recognized that the consumer market had changed and the demand for digital music and Mp3s was taking over traditional forms like CDs. Meanwhile the Walkman was left behind still doing things the old way.

The reality is that the past is the past. Markets are always changing and for businesses to remain successful and thrive they must adapt with them. The building and remodeling industry is not the same as it was 5 or 10 years ago, so if you are still approaching customers like you were back then, you are probably seeing a decline in sales. What do you do about a drop in sales? Adjust to today's marketplace.

Will energy costs rise, fall or stay the same? No matter what, the new normal is that energy for your car at the gas pump (According to Money Magazine this expense is 5% of a typical budget) - energy to heat and cool your house (According to Money Magazine this expense is 4% of household budgets) are high. What can a consumer do today to lower their gas expense for their current car? Right, not much. But what can a consumer do today to lower their energy costs on their home? Right, allot!!!

From Jonathan Sweet, Senior Editor, May 1, 2008 Professional Remodeler Magazine:

"Two major factors will combine to make green have staying power: rising energy costs and the more environmentally friendly attitudes of younger consumers - the homeowners of the future."

"This is certainly not the end of rising energy costs, so people will continue to be looking at energy efficiency," says Sekley. "It appeals to people who are more environmentally conscious and there's a dollar and cents benefit."

According to Money Magazine:

Home energy - Seal up your house

4% of your household budget.

Up 9% from a year ago

To find air leaks, conduct a home-energy audit following the instructions at energystar.gov or hire a pro to do it for $200 and up.

You can cut up to 25% of your heating and cooling costs by adding insulation and using caulk, spray foam and weather-stripping to seal leaks around windows and doors and in attics and basements.

Potential savings: $1,375 in five years, after materials

Today's successful home improvement contractor needs to realize that yesterday's solutions do not solve today's problems.... Green and Energy Conservation are not fads...they are trends that affect behavior and drive consumer's decisions.

Today's homeowner, although concerned about their home's aesthetics, are looking at much more practical ways to invest in their home. Studies today indicate that they want to improve the energy efficiency of their home, 87% of homeowners rank energy efficiency as the most important upgrade and 90% say they would pay up to $5,000 more for an energy efficient home. Energy efficiency will not only save you money on energy bills but will add value to your home.

Mark Willinger
Modern Builders Supply, Inc.
Building Industry Articles

Renovate With EIFS - Home Tips

Ontario's Home Energy Audit provides rebates to home owners who improve their home in some way to reduce energy consumption and waste. The program provides rebates from $60.00 per energy-star qualified window, to $1,000.00 for a high efficiency furnace, to $3,000.00 for insulating the exterior of your home. Why is the largest grant (by category) given to Exterior Wall Insulation? One of the reasons is it can have the largest impact on keeping the heat inside your home as home owners typically see a 20-30% reduction in their heating and cooling bills after renovating the exterior of their walls with EIFS (synthetic stucco).

First Thing is First

In order to qualify for the rebates, you need to first have someone do the Ontario Home Energy Audit. This involves contacting the Government's ecoENERGY program to have an inspector come to your house and evaluate your eligibility. You will fall into various categories ranging from not eligible (because there is nothing that needs to be done), to partial benefits to improve certain aspects, to the full grant for adding something that is not currently there. The majority of homes do not have insulation on the exterior of their homes (from the sheating substrate and outward), which makes most home owners eligible for the full $3,000.00 rebate. From the day of the inspection, you have exactly 18 months to complete all your retrofits and get the auditor back.

Get Quotes For an EIFS Retrofit

It may even be a good idea to do this first so you don't waste time trying to find contractors and prices. It is important to get multiple quotes, from different contractors to get a feel for what the price should be. They can be found via the internet, yellowpages, referrals, or preferably by the EIFS manufacturer who will recommend you to a few contractors they know that do quality work. Speaking with different contractors will open your eyes to aspects others may not mention, such as decorative items or things you need to consider like temporarily removing your soffit. Things that may affect your quotes include:

• Time of year will affect price, which is higher during the winter and busy season
• Not requiring a weather barrier (only if going over brick, concrete or CMU) will save money
• Small portions (such as dormers) often cost extra
• Decorative elements such as mouldings and cornices cost extra

Let's say you understand what your options and prices are after getting 5 quotes, which do you choose? To start, if one is far below the others, toss it immediately. Any money you will save will come back to bite you down the road, and the repair can be more expensive than your synthetic stucco retrofit in the first place. Most of the time you want to go with quote #3 or #4 in terms of price. Don't forget that you can add decorative elements (like window sills, quoins, trim) at a later date -- one of the great benefits of EIFS.

Thickness of Styrofoam

Though this will affect the price and is up to your discretion, a minimum of 2.5" of "Type 1 Expanded PolyStyrene" (the white styrofoam) is required to qualify for the full $3,000.00 rebate. Typical styrofoam thickness is 2", which would get you the $1,800.00 rebate, however the additional 1/2" will not (or rather, should not) run you an additional $1,200.00, which means you will actually save money.

For the technically inclined, a total of R-3.8 to R-9 will qualify you for $1,800.00, while an R-value of 9 or above qualifies for the full $3,000.00 rebate. Type 1 Expanded PolyStyrene (the type of white styrofoam EIFS manufacturers carry and specify) is rated at R-3.71(per inch). This means adding 1" of styrofoam qualifies you for no rebate (yes, they are serious about that 0.09 of R value missing), while 2.5" will qualify you for the whole $3,000.00 (2.5 x 3.71 = 9.275). The other layers of EIFS do provide some R-value (arguable enough that 1" would qualify you for the rebate), however the government stipulates that the R-value is calculated solely on what is added to the wall via styrofoam.

Plan All Your Retrofits, Then Proceed

You want to consider other renovations at the same time as your Synthetic Stucco retrofit. If you intend to add Energy Star qualified windows, they must be installed prior to adding Synthetic Stucco so that they can be properly "tied in" to the wall, that is, to prevent moisture intrusion. You will want to cover these windows while the EIFS is being installed to lessen the chances of them getting dirty. Again, soffits need to be removed during installation to avoid unsightly gaps at the top of your wall which double as a point for water to penetrate. A little bit of planning goes a long way in saving you money and head aches.

Get The Auditor Back

Once everything is finished it's time to have the inspector come back to re-evaluate your home. You will need to show him copies of the bills with the specifications (for example, the EIFS contractor would specify "2.5" insulation added" on his invoice), and pictures of the product being installed may help -- make sure to find out exactly what the auditor is looking for during the first visit. Remember also, that you only have 18 months from the first inspection to get him back, otherwise you forfeit any claim you have to rebates. You may only do this once (ever!) so make sure you do all your retrofits at one time for the rebates, or be prepared to pay for future retrofits out of your pocket.

Upon verification that a minimum of 2.5" of insulation has been applied to all wall surfaces on the exterior of your home, the auditor will check to see if you qualify for any additional rebates for retrofits which may have been undertaken, then electronically submit the result to "Natural Resource Canada" and the "Ontario Ministry of Energy and Infrastructure". From the time your auditor performs the final evaluation, you can expect to wait anywhere from 5-9 weeks for the audit to be processed another 1-2 weeks for the cheque to arrive.

Don't forget that on top of the rebate, renovating your home with Synthetic Stucco increases the value of your home (you recoup up to 88% of the renovation cost via increased home value) and can reduce your heating bill anywhere from 20%-30%, saving you over $500 per year.

Jim Schwarznoff is a Construction Project Management student with an emphasis on the building envelope and exterior design. For more information on EIFS (Synthetic Stucco) and to get quotes from Stucco Contractors visit http://www.TorontoStuccoContractor.com/. For more details on the Ontario Home Energy program, visit: http://torontostuccocontractor.com/blog/2009/01/the-ontario-home-energy-audit-provides-3000-towards-an-eifs-retrofit/

DIY Projects For Interesting Weekends

People usually do their do-it-yourself projects during the weekends. While some people enjoy fishing or playing golf, many choose to try their hand at do-it-yourself projects around the house.

Easy home improvement projects and the like are a good choice for enthusiasts of all competences.

How to paint woodworks

The first step is to secure the edges of the woodworks around the work area. Use wide masking tape that easily peels off. Mark all the wooden surfaces to be worked on. Begin the painting process with two coats of primer.

Make sure that the color you choose for the final layer of paint would not clash with the overall design of the area. Make sure that there is harmony between the new paint and the old paint.

First paint all windows, before larger objects such as doors. Skirting boards should be painted last. Use fine brushes that easily absorb paint and use even strokes when painting.

The spreading of paint should be done sideways, to save paint and to achieve an even texture on the surfaces. The size of the brushes you will use should be one inch or two inches wide. Avoid overly large brushes as these absorb far too much paint when used.

If you are painting outside your house, avoid painting during windy or rainy days. Windy days will ruin the new paint with flecks of foreign particles.

How to unclog your toilet

Use an old-fashioned plunger for this task. If you do not have one at home, go to your hardware store and purchase the largest plunger available. Plungers are generally inexpensive, and the larger the plunger the more effective it would be.

After you have acquired the plunger, place the plunger in the blocked toilet and flush. The flushing will flood the toilet bowl. As the toilet bowl slowly fills with water, move the plunger up and down.

Make sure that you are consistent with the up and down movement. If you have done it correctly, the vacuum created will dislodge the blockage from the pipe.

The extra water that had been flooding the toilet bowl will slowly recede and will help carry away the blockage. If it is a hairball, add another wave of water to the receding flow by flushing the toilet again.

Next time, avoid flushing kitchen towels and similar kitchen implements to avoid further blockages. People should also avoid flushing cotton swabs, as these will eventually accumulate.

Wallpapering

Hanging wallpapers is easy, as long as you clean the surfaces well before attaching the wallpaper. With sandpaper, smoothen the wall to level the surface. If the surface of the wall is glossy, use the same sandpaper to roughen a bit. Making it rough will make the wallpaper stick better.

Use a table when applying the adhesive to the wallpaper. From the top of the table, roll down wallpaper and apply the adhesive evenly. A soft brush may be used to make the application easier.

To ensure that the wallpaper would be evenly distributed, use a plumb line. The wallpaper should be as even as the plumb line when the two are placed parallel to each other.

The author of this article is Benedict Yossarian. Benedict recommends Roof Bond Foam Roof Insulation and Dekorbeton Concrete Stamping for your DIY needs

Proven Tips For Building a Wind Generator Yourself

Installing a wind generator can help you save substantial amounts of money on your electricity bills each month. If you are someone who wants one in your home, you can also consider building one on your own. Building a wind generator not only helps you save money on energy bills but also to contribute your might towards a clean environment.

Building a wind generator can seem a daunting task if proper planning is not involved. You will first of all need to have adequate knowledge about the various parts that make up the generator and how to put them together. Fortunately these days there are many detailed guides available over the internet that can help you gain knowledge about all these aspects.

Before you start the process of building a wind generator, you will first of all need to list down the things that you will need. The good news is that you can find most of the things at a hardware store near you. Some of the supplies you will need include nuts, bolts, steel tubing and battery packs, among others. You can also try building a wind generator with recycled materials too. Scrap metal from a local recycle center near you can always be used to make a wind generator. This will help you cut down on energy costs even more.

A wind generator can help you save on your energy bills by even 70 percent when used judiciously. Building one is not a difficult process too, what with the many useful online guides that are available nowadays. A little bit of online research coupled with your effort is all that is needed for you to take advantage of wind power.

Are you someone who is in search of an online help that will guide you with building a wind generator? Visit W3Reviews, a complete guide on using wind power, which can help you build your own wind generator.

To Install Gutters Or Not to Install Gutters

They divert rain water away from your foundation and landscaping. They protect the ground around your home from erosion. They keep water from pouring on your head as you enter and exit your home. They can be used to collect rain water for watering your lawn and plantings during drought times. Why wouldn't you want to install gutters on your home?

They leak. They clog. They overflow. They rob the plants around your home of a good soaking. They can cause tremendous erosion at the base of downspouts. They're ugly! They require maintenance from a dangerous rooftop or ladder. Why would you want to install gutters on your home?

There is no easy answer to the simple question: "Should I install gutters on my home, or not?" You'll simply have to weigh the pros and cons for your particular situation and decide for yourself.

The first thing to consider in making this decision is do you really need them? Take a look at the ground around your home. Does it slope away from your foundation? If it does you don't need gutters to keep water away from your foundation. If it doesn't you should probably look into some grading work before worrying about gutters anyway.

Next, take a look the landscaping surrounding your home. Can it be damaged by rainwater falling from the edge of your roof? This may be a tough question to answer at first thought. Go outside and inspect the areas under your eaves. If you find bare ground, mulch or lawn you should definitely consider gutters, or a change in ground materials that your rainwater will fall upon. If you find mature shrubbery, stone or any variety of hardscaping you probably don't have to worry about erosion. Consider the height of your roof. Water falling from the edge of a two, or three, story home will cause far more erosion and water falling from a single story home.

Do you have trees around your home? Are they taller than your roof? Will they eventually be taller than your roof? If you have, or someday will have, trees that will shed leaves onto your roof you should seriously consider making do without gutters. Consider installing an alternative to gutters, or invest in one of the better products designed to keep leaves and other debris from entering your gutters. And don't be fooled into thinking that coniferous trees (e.g. pines) don't count. They drop as much, or more, material onto your roof as do deciduous trees.

A clogged gutter or downspout is not only useless, it is dangerous. The overflow is likely to find its way into the fascia board to which the gutter is secured causing rot and possible infiltration into walls and other structural members of your home. Where the collected water hits a clog it overflows, pouring onto a concentrated area of your landscaping or hardscaping causing damaging erosion. Water is heavy. A full gutter can break free damaging your home, or worse.

Do you live in an area that compels you, or forces you, to ration water use? This factor alone can trump all others. Collected rainwater is superior to any other source of water for lawns and other plantings. It can be used to wash your cars or fill pools and other water features. You use it for washing clothes and bathing, even for drinking with proper treatment.

Can you get by with a simple diverter over your entryways allowing water to fall to one side or both? Can you simply deal with a bit of water shedding onto your head during storms? Can you deal with the mundane appearance of traditional gutters and downspouts? Granted, half-round copper gutters and round copper downspouts add elegance to Victorian and Gothic architecture, but standard aluminum "K" gutters and rectangular downspouts can do more to break the clean lines of modern houses than any other exterior accessory items.

Chances are you live in a home that already had gutters installed either for need or as an afterthought of conformity. If you are looking at having a new roof or siding installed think hard on all of these points before making a blind decision to replace your gutters and downspouts as well. If you are building new, consider the site and talk to your neighbors, especially if you are moving to an unfamiliar area. In the end, the decision is yours and yours alone. Make an informed one.

Mike Hudecheck
Pro-G Contractors
Roofing Siding Windows Doors
Delaware, Chester, Montgomery, Philadelphia Counties in Pennsylvania; New Castle County in Delaware; Cecil and Harford Counties in Maryland
http://www.progcontractors.com

United States Savings Bonds How Do I Calculate US Savings Bond Values?

A savings bond is a treasury security for investors. In essence, investors are loaning the government money. They are issued both as paper bonds and electronic savings bonds. They cannot be traded but can be redeemed after only one year. There are no dividends, per se, with a savings bond, as the interest payments are simply added on to the value of the bond, but as tax-deferred items, the interest doesn't have to be reported to the government until the bonds are cashed.

The value of a savings bond varies with the kind of bond purchased - series A, B, C, D, E, EE, F, G, H, HH, I, J and K. It also depends on when it is cashed and what kind of interest it has been assigned. Since 1935, the treasury has issued savings bonds in alphabetical progression. For example, series A bonds were offered the first year, Series B bonds followed in 1936, Series C ran from 1937-1938, and Series D were issued from 1939-1941. Series E bonds, longest running of the treasury savings bonds, ran from May 1941 until they were discontinued in 1980.

Series EE bonds were brought out in 1980 to replace the series E. They can be purchased at half or full face value. They come in amounts between $50-$10,000, and carry a maturity date of between eight to thirty years. Those cashed in before the fifth year are penalized three months' worth of interest.
If EE bonds are purchased through a bank or other financial institution, it is also known as a Patriot Bond. There were more kinds of savings bonds, including the series F and G (which were offered to all investors except banks), series H, HH, Series I, J and K.

How do we calculate the value?

The value of a savings bond can be calculated by taking note of the face value of the bond, the interest rate from the time the bond was issued until the present time, and whether there are any penalties that have to be deducted. In addition, it is important to note that a bond that is issued at half the face value will be worth the face value at maturity, while a bond that is issued at face value is worth twice this amount at the time of maturity. Savings Bonds can also increase in value if they are redeemed past their maturity date, in which case the interest must be calculated on a year-to-year basis.

On http://www.bond-trading.org/ you will find articles on municipal bond investments and how do savings bonds work.

Natural Wood Cedar Garage Doors

Natural wood garage doors are aesthetically very pleasing and add value to any home. Redwood, oak and cedar garage doors are very popular with many new home builders. Natural wood is really great at accenting your home. In terms of garage doors pricing wood doors are relatively cheap to build and install however they are obviously not as durable as conventional metal or composite garage doors.

Wood garage doors will weather quickly and expand and contract with temperature and humidity changes. As such frequent up keep will be required to keep them in good condition. Many of the new wood care products do a very good job of protecting wood products including wood garage doors. If you live in area with long winters and deep snows where the snow will lay against the doors for an extended period then you will need to conduct maintenance more often. Also if you live in an area with long periods of heat and humidity such as the Southeast US you will also have to do a good job of regular maintenance to protect your investment.

The lowest priced wood garage doors are constructed of redwood while oak and cedar garage doors are normally about twice as expensive. A 16 x 7 redwood garage door will average about $600 to $800 depending on the type of door construction. Tilt-up garage doors are especially adaptable to using wood for construction. Cedar garage doors have an additional advantage of being lightweight and very rot resistant. In addition white cedar garage doors do a fairly good job of insulating as well.

If you decide to use a flush fit roll up garage door construction you should make sure the panels are constructed of one solid piece of wood. Failure to do so will mean that there is a good chance that glued and stapled seams will begin to show after weathering. Finding redwood and cedar material that is straight and clean can be expensive. Thin wood panels will have a higher risk of warping than larger dimensions. However it you are installing an oak door with long solid panels then door weight may become a concern.

For obvious reason you would not want to install cedar garage doors or any wood door in areas of high wind risk. However you can apply a wood door covering to a high wind rated door that will protect your home from hurricanes and meet local high wind building codes. In some case local building codes will not permit the modification. It probably be best find a conventional high wind garage door manufacture that has a very good artificial wood finish embossed on it if you live along the Southeast Coastal areas.

When building your home there is no doubt that natural wood garage doors do look very nice. The look of an oak, redwood or white cedar garage doors that are well maintained will certainly enhance the value of your home. It really is hard to beat the natural look of real wood.

James Kesel, MS, is the publisher of the Garage Doors Pricing Website located at http://www.garagedoorspricing.com - Providing information on Cedar Garage Doors and the purchasing, installing and operation of a garage door.

What is Injection Waterproofing?

Injection waterproofing is often used to fill and seal cracks and crevices. The material is most often made from a polyurethane compound. The compound is lightweight and expands up to twice its original size when applied to a surface. Many non-toxic and environmentally safe products are available at home improvement stores nationwide. Injection waterproofing is used mainly in foundation crack repairs.

In most foundation cracks, a polyurethane injection can seal the opening. In some smaller cracks it may be apparent that a sealant was used because it may be difficult to evenly inject the compound. Single caulking style cartridges and the dual side-by-side cartridge systems are the types of injection waterproofing compounds available for retail purchase. Both of these are manually injected and easy to pump.

When using an injection waterproofing method, it is important to keep the area dry. Temporarily block any flowing water to the area, and clean and dry the area as needed. Experts say that in the case of water flowing through a hole, you can temporarily caulk the hole with candle wax, modeling clay or plumbers putty. If the cracks are in narrow or hard-to-reach places, you can use a flexible hose attached to the injector nozzle.

Whatever waterproofing system your leakage problem requires, be sure to do your research. If you choose to make this a do-it-yourself project, make sure you know where your leaks are coming from and the proper method to repair them. When purchasing waterproofing materials you should make sure you are buying the appropriate product for your needs. The National Association of Waterproofing and Structural Repair Contractors (NAWSRC) has tons of information on waterproofing. Whether or not you decide to hire a contractor, this organization can help you from beginning to end.

Waterproofing Info provides detailed information on waterproofing systems, including injection waterproofing, foundation waterproofing, concrete waterproofing, deck waterproofing, basement waterproofing, and waterproofing basement walls, as well as waterproofing contractors and consultants. Waterproofing Info is affiliated with Business Plans by Growthink.

Earth4Energy Review

What Is Earth4Energy?

It is a DIY guide on how to build your own renewable power generator. In specific it will help you build solar panels and/or windmills to power your own home with. It can be downloaded instantly online.

What Are The Benefits Of Earth4Energy?

• Saving a significant amount of money on your home's electric bill.
• Helping the environment by using renewable energy.
• When the "power goes out" you will still be able to have your lights on.
• It cuts the cost of having your own solar panels by thousands of dollars.

How Much Does It Cost To Implement The Plans?

You can implement the DIY plans in Earth2Energy for less than $250. That may only be a couple of months of your electricity bill. When you have a renewable energy source you will be saving a huge amount of money on your electricity bill, you may even be able to eliminate your electric bill entirely! So as you can see you will be saving much more money than you are spending.

What If I Can't Get The Plans In The Guide To Work?

You should be able to as the plans are set out in an easy to read, easy to follow way. But if for you are unsatisfied for any reason at all you will receive a complete refund. That means there's literally no risk involved in purchasing this guide online now.

Can I Build Solar Panels & A Windmill?

Absolutely. If you want to have both, build both! That will give you even more free renewable energy. You may find that you enjoy this activity if you are a DIY type of person.

Download Earth4Energy Now.

Earth4Energy Review.

Finding Grants for Green Construction

When it comes to new construction techniques, grants are often a way to cut costs. Federal grants for green construction are plentiful with billions literally available.

A federal grant is an award of financial assistance from a Federal agency. It is intended to carry out a public purpose or support or stimulate a purpose that is authorized by a law of the United States. Federal grants can be found and applied for electronically. The site Grants.gov is the central clearing house for Federal Grants.

There are twenty six different agencies that offer over 1,000 grant programs. The grants that apply to green construction are mostly offered by the U.S. Department of Health and Human Services. The total amount of grants available exceeds $400 billion dollars. The grants offered by the feds fall into twenty one categories. The categories that have the most impact on green construction are Energy, Environmental Quality, and Health.

Most of the grants are directed toward specific geographical areas. Some of the major concerns of the grants include water quality improvement and the prevention of urban storm water runoff. Many of the grants are connected with the Leeds certification program. Leeds stands for Leadership in Energy and Environmental Design. It is a program that is run by the United States Green Building Council and it establishes green construction standards and awards certificates to those that maintain these standards.

Although there are federal grants available, it is on the state and local level that the large majority of grants can be found. The green movement is a grassroots type of thing that appears to be strongest at the local level. Environmental concerns are often very local, and the problems that have been caused by the neglect of the environment are local as well. The pollution of waterways is a good example of this. grant programs exist that are directed at the Great Lakes or at Puget Sound, for example. States that are bordering these waterways usually offers these grants. The idea of environmental impact areas has led to the localities that border or are inside the impact area being the best source of funds for projects that will address the problems.

Private foundations like the Kresage Foundation are among the best sources of green construction grants. The Kresage Foundation has been offering grants under their Green Building Initiative Program. It is specifically geared toward the area of planning and design. While it is true that State, local, and private foundations are the major sources of grants that can be considered pure green building, the federal government is also a source. Research is the key to finding a grant for your project, so take the time to explore the various options mentioned above.

Zack Verde is with GreenBuildingCompanies.com - providing green building articles.

Solar Lighting For the Garden Saves Energy and Gives a Warm Glow

The sun powers your outdoor lighting? Yes, this is not only economical, it is also ecologically smart. Solar lights use the sunlight to charge batteries which power the solar lights. Solar lights may be set to automatically go on at night and can stay alight for up to 9 hours or more.

Solar Lighting Shines a Romantic Glow

Solar outdoor lights are excellent for the garden yard, deck or entry path, giving a romantic soft garden glow. Garden lighting effectively adds a warm touch of home, even before entering the house. Individual accent lights showcase interesting elements in the yard. Spotlights can make a plain tree look spectacular at night, which may just increase your property value as well.

Solar Lighting in the Garden. The Practical Option

The solar receptor panels generally last about 20 years with proper care. Solar garden lighting helps illuminate dark paths, or highlight certain landscape elements. There are solar lights that can be installed onto the house or poles, so that it is not so easy for thieves or vandals to walk away with the fixtures.

Solar Garden Lighting Scares away common Burglars

Solar lighting helps to scare away thieves, by giving the feeling of someone is at home here. In fact, there may be solar lights that can be set to turn on and off at certain times in the evening, just like you may now be using light timers inside the house to give the impression that someone is at home turning the lights off and on at certain hours in the evening. Movement detectors on solar lights are extremely good in preventing unwanted guests, and just as effective at welcoming an expected friend. Do you remember the feeling you felt as you approached the front door of a house of a friend, as the front poor light went on as you approached the stoop? You may have had an alarmed feeling, like Clifinar did, or felt happy that the area became lighted, aiding you in finding the steps, avoiding cracks in the walk, or the garden hose hat may have accidentally been left lying across the entry path!

Solar Lighting and Caring for your Garden

During the Fall and Spring, when you are arriving home in the early evening, many times it is just getting dark, or is already dark. With the energy-saving solar lighting you have installed, you can comfortably see your garden and be able to water the garden. Evening hours is a perfect time to water, as evaporation is not a problem, as it is in the hotter daytime hours.

Outdoor solar lighting creates a welcoming ambiance of warmth and safety. That could be why Mom always left the light on for you.

Dan Flower is a writer for No-Crank.com, a leading manufacturer of automatic garden hose reels